MID Energy Meter
ADL200 MID Single Phase Energy Meter
| Picture | Standard | Optional |
 ADL400 |
Meteing:Active KWh (Positive And Negative)，Reactive KWh (Positive And Negative)， A. B, C Phase Positive Active EnergyMeasurement:U、I，P、Q、S、PF、F2~31ST Voltage And Current HarmonicPulse Output：Active Pulse Output | C:RS485(Modbus-Rtu) |
| F:Multi-Tariff |
GENERAL
FUNCTIONS
TECHNICAL PARAMETERS
Voltage |
Rated voltage |
AC 220V |
|
Rated frequency |
50Hz |
||
Consumption |
<10VA |
||
Current |
Maximum current |
80A |
|
Starting current |
0.01A |
||
Consumption |
<1VA |
||
Measurement performance |
Accuracy |
kWh Class 0.5 |
|
Range |
0~9999999999.99kWh |
||
Clock |
Accuracy |
Error ≤0.5s/d |
|
Active pulse |
Width |
80±20ms |
|
Constant |
1000imp/kWh,10000imp/kWh |
||
Communication |
Interface |
RS485 |
|
Protocol |
Mod bus-RTU |
||
Temperature range |
Work |
-25℃~55℃ |
|
Storage |
-40℃~70℃ |
||
Humidity |
≤95%(No condensation) |
||
Altitude |
<2000m |
||
DISPLAY
DISPLAY
FRONT PANEL
NETWORK
INSTALLATION
FAQ
Q: The display power or energy count is inaccurate after the meter powered on.
A:Switch the meter display interface to the power (active power P, power factor λ) interface, and check whether the power display is negative or not.And whether the power factor is between 0.9-0.95, and then check whether the incoming and outgoing wires of the current signal wire are connected reversely (that is, the current The incoming wire must be the same as the incoming wire end of the meter), and consistent with the wiring diagram on the meter.
Q: It cannot communicate with the host computer normally after the instrument powered on.
A:1. The voltage value between the communication output A and B of the measuring instrument should be between +(4.4-4.5)V .
2. Check whether the communication wiring method is correctly wired according to the wiring diagram (that is, the communication terminal A/B of the instrument must be connected with Corresponding to communication serial port A/B);
PACKAGE
MINIMUM PACKAGE |
 |
 |
 |
 |
MINIMUM PACKAGE |
Package dimensions(4 PC) 170*150*130mm |
Net Weight(0.034KG/PC*4) 0.136KG |
||
WHOLE BOX PACKAGE |
Package dimensions(36 PCS) 480*260*200mm |
Package Weight(36 PCS) 2.304kG |
||
PRODUCT HS CODE |
9028301400 |
|||
